Contact | Home

Site Menu...


Weedy Lane Plant
116,400 sq. ft. under roof.
Capacity to lift 50,000 lbs.
100 full-time employees.
 

Old Humble Road Plant
22,000 sq. ft. under roof.
Capacity to lift 20,000 lbs.
15 full-time employees.

Our Facilities...

With three Houston area plants, Myrex has the capacity to serve all your steel fabrication needs.  And Myrex has been AISC certified since 1998!


 Production Plants
  • Three plant locations with combined 158,000 sq. ft. under roof
  • Fifteen acres of yard space to store projects for delivery as your site conditions allow
     
  • In-house detailing personnel
  • State-of-the-art precision tools and equipment
     
  • Fully automated saw and beam line


Major Shop Equipment

(Click photos to enlarge)
 

    CNC Angle and Flat Bar line(click to enlarge)
     
    • Controlled Automation ABL-100
       
    • Capabilities include: 

      •  

      • Punches:
        Capacity - 115 tons
         Slug Hole Size - 2"
         Maximum Hole Size - 1  9/16"

      • Material postitioning:
         Speed - 0 to 160 FPM
        Accuracy - plus or minus 1/32" electronically

      • Shingle shear cut:
         Capacity - 215 tons
        Kerf - 0"
        Maximum angle size - 8" X 8" X 3/4"
        Maximum bar size - 1" X 1/2"

      • Material capacity:
        Maximum Angle Size - 8" X 8" X 1"
        Maximum Bar Size - 1" X 12"
        Minimum Angle Size - 1 1/2" X 1 1/2" X 3/16"
        Minimum Bar Size - 3/16" X 3"

      • Myrex installed options:
        Storage and loading table
        Out feed and dump conveyor
        Automated part marking unit
        Special Punch Capacity of 143 Tons
        Single cut machine.
        Four Punch Model

    Saw Line
     
    • HEM Saw WF-140HM-DC
       
    • Capabilities:
       
      • 21" round, 20" x 44" (w) capacity
      • Cut W44 and smaller members
      • Cut bundled materials
      • CNC material nesting to make the most of material lengths and production efficiency.
      • CNC controlled for precision accuracy of + 1/32”

     

    Beam Line

     

    • Controlled Automaton BFC-530
       

    • Capabilities:

       
      • speed - 0 to 180 feet per minute
      • high speed servo motors allow conveyor system the highest amount of control at high speeds. Powered side clamps allow the material to be driven through the machine, rather than simply conveying it
      • Computer controlled accuracy of + 1/32”. Precision encoders mounted throughout the machine allows positioning of both length and gage to achieve these tolerances. Sophisticated servo and valve positioning software provide accurate and smooth positioning
      • 115 Ton punch capacity - Higher tonnage allows parts to be punched that previously had to be drilled, thus saving manpower and expense
      • Graphic part programming

         
        •
    Fabripunch

     

    • Peddinghaus F-1170B-38R

      For precise plate and angle detail, the Fabripunch permits economical punching of plates and angles whether production requirements are for short or long runs. The Fabripunch has 170 tons (153 metric tons) of punching power with a 30” (762 mm) throat depth.
       

    • Capabilities:
       
      • Plate Thickness Maximum - 1.25"
      • Capacity - 170 Tons
      • Hydraulic Pressure - 3000 P.S.I.
      • Hole Size Maximum - 1.5"
         

      <Top of Page>

Lauder Road
Plant
20,000 sq. ft. under roof.
Six 5-ton cranes.
18 full-time employees.


 

 

 
Myrex Industries © 2012 | All Rights Reserved

Home | Contact

Website Design by doubleRwebs